double component marble wall tile adhesive

1.Fine compressive property,stretch proof 2.Fine aging ,water ,weather resistance 3.Non corrosiveness 4..No liquid droppin

product name:double component marble wall tile adhesive

Application:

1.The dry bonding of hanging parts fpr internal or external stone wall;

2.The reinforcement or bonding for the precast concrete form or structural strengthening;

3.Bonding or pattern making for tiles and marle;

4.Joint for tiles and brick or tiles and concrete;

5.Fissure filling for concrete;

6.Anchor adhesive;

7.Not available for smooth surface;

8.Not available for stone surface finished care ptocessing;

9.Not available for working in water or oil surface.

Main Properties:

1.Modified epoxy resin polymer with fine aging resistance,high mechanical strength;

2.Solidified adhesive with fine water resistance, humidity resistance, chemical resistance and weather resistance(-10~90°c);

3.High thickness adhesive with no liquid dropping and utilization ratio reaching up to 95%;

4.Fine earthquake-resistance;compressive property,stretch proof, impact resistance;

5.Non corrosiveness;no injury to human body, if inadvertent to be stained, wash with soapy water;

6.Clean operating environment; low construction cpst; reducing process and cutting expenses down of lime sand transport and silt displacement;

7.Inflammable; safety and non-toxic.

Typical Physical Porperties

Part A

Resin type	Exoxy resin
Aspect	Gel in white color
Viscosity(25)	10,000-30,000.P
Density	1.5-1.6/m3
Storing time(10-25)	12months keep in cool place
Dangerous decomposition	Usually none
Garbage discharge	Based of national and laws, local provisions

Part B

Main ingredient	Organic modified amine
Aspect	Gel in cream color
Viscosity(25)	10,000-30,000.P
Density	1.5-1.6/m3
Storing time(10-25)	12 months keep in cool place
Dangerous decomposition	Usually none
Garbage discharge	Based of national and laws, local provisions

Technical data:

Characters	Standard index	Tested data	Test method
Working time(25)min	5-30	15	GB/T12954-1991
Working temperature/	-10-40	-10-40	GB/T12954-1991
Using temperature/	-45-90	-45-90	GB/T12954-1991
Impulsion intensity of KG/m²>	3.0	4.5	GB/T2571-1995
Shear Strength Mpa>	8.0	18.0	GB/T7124-1996
Impress strength Mpa>(stone-stone)	10.0	17.0	JC 887-2001
Impress strength Mpa>(stone-steel)	10.0	17.5	JC 887-2001

Attention:

1.Make the surface to be bonded rough if it is smooth;

2.Operation temperature -10°c~45°c;

3.Do not move the bonding parts until it solidifies completely;

4.Heat the adhesive to 30~40°c if used in winter

5.Do not operate with it in the wet place;

6.Effective operational time of the mixed adhesive is 15 minutes;

7.Do not reload the excess adhesive back to the original packing;

8.Clean the tools immediately with acetone after use;

9.Keep away from children and do not swallow;

10.12 months valid if stored in ventilative place,could still be used if retest shows to be qualified;

11.Refer to the application guide on the package before use.

Instruction:

1.Surface pretreatment:Clean surface to be bonded away from laitance,dirt,loose mortar,oil,etc;

2.Mix A with B according to the ratio 1:1 and stir them intensively until the mixture uniformed color achieved;

3.Paint the surface to be bonded evenly with steel scraper or other tools like this.

double component marble wall tile adhesive